- 4 -
Installation procedure:
1) Remove the sticker from the front panel.
3) Fill up sews in the cabinet with sponge
or foam.
2) Put the unit into the installation hole.
● When installing the unit, it should be sl-
anted down to the back to avoid the en-
largement of noise or vibration. (Slant
between 6-10mm.) (Shown at right
●
The installation place should be strong
enough to avoid the enlargement of
noise or vibration.
6~10mm
Horizontal line
Installation assistance:
● Use iron support
The installation hole should be stro-
ng enough to support the air condit-
ioner.
If it cannot, iron support has to
be used outdoors. Iron support sho-
● Use sunshade board
Air c
ond
itioner shoul
d
avoi
d
anything
to be dropped into it and avoid direct
sunshine. If there is no cover on it,
you shoul
d
contact the seller for inst-
alling the sunshade board. When in-
stalling the
sunshad
e boar
d, don
’t let
it block the air inlet at the side grille.
W
all
Wooden
frame
Sunshade
board
Rubber
plate
6~10mm
Support
Horizontal line
