Sinclair ASC-XXAIN, User Manual

Page: 30 / 52

Wired Controller XK60
18
3.15 E-HEATER Setting
E-HEATER: in the HEAT mode, “E-HEATER” function is allowed to be activated to improve the
heating efficiency. Generally, it will be activated automatically as the unit goes into the HEAT mode
through any button operations .
Activation of the “E-HEATER” Function: firstly press the Function button to select the
“E-HEATER” option, with the symbol “E-HEATER” flashing, and then press the Enter/Cancel button
to activate it. After the activation, the symbol “E-HEATER” will always be displayed.
Deactivation of the “E-HEATER” Function: firstly press the Function button to select the
“E-HEATER” option, with the symbol “E-HEATER” flashing, and then press the Enter/Cancel button
to deactivate it.
“E-HEATER” Function setting is as shown in Fig.21:
Unit On, no E-heater function Press “Function” button to set
E-heater function
Press “Enter/Cancel” button to
activate E-heater function
Press “Function” button to set
E-heater function
Press “Enter/Cancel” button to
cancel E-heater function
Fig.21 “E-HEATER” Function Setting
Note: The “E-HEATER” function is not available in the COOL, DRY, and FAN modes, with the
symbol “E-HEATER” not displayed.
3.16 Blow Function Setting
BLOW function: After the unit is turned off, water in evaporator of indoor unit will be
automatically evaporated to avoid mildew.
Activation of the “Blow” Function: in the COOL or DRY mode, press the Function button to
select the “Blow” option, with the symbol “BLOW” flashing, and then press the Enter/Cancel button
to activate it.