SINBON Electronics Co., Ltd.
4F-13, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-Chih, Taipei Hsien 221, Taiwan
Tel: +886-2 2698-9999 Fax: +886-2 2698-9660
www.sinbon.com
(Step5). After the completion of the configuration can be in the router rights administrator page,
find assigned to the Gateway IP address, then if change the setting the Gateway information,
need to use the IP address.
6. LED Status descriptions.
Power LED
Fixed light: Input power is success.
Fixed off: Input power have problem need to check.
Status LED
Fixed light: The device transmits data to database is completed.
Fixed off: The device no connect with database.
Light blinks: The device data is transmitting to database.
Wireless LED
Fixed light: The device is connect with sensor and transmits data to far-end
database.
Fixed off: No connect with sensor or no data transmits to far-end database.
7. Reset to the factory default setup instruction.
(Step1).
At the system turn on mode, press and hold the SG-70 the reset button.
(Step2). After the Power LED is flash 3 time and waiting 10 seconds the system will be restart the
system completed.
*The function only at system turn on used!
WARING: Service should be provided only by a qualified service technician!
This document contains confidential and proprietary information, all information are reserved by SINBON Electronics Co., LTD.
17
