Sinbo SS 4053, Instruction Manual

Page: 3 / 8

- 2 -
by slightly moving this unit against the skin at right angle.
* With pop-up trimmer; can trim sideburns and moustache
Maintenance
* Before cleaning, the product will be disconnected and shut down.
* Take off the shaver head, clean the head, the inside blade and the body with brush;
with a clean brush, do not touch the surface of the outside foil with brush, push on the
trimmer, and clean it with brush. After cleaning; push off the trimmer, and install the
shaver head.
* After cleaning, the lubricating oil is dripped into the foil and the edge of the trimmer,
and then idled several times; wipe the surface of the outer foil, so as to maintain sharp,
light rotation and prevent wear and tear.
* STORAGE
* Ensure the unit is completely cool and dry.
* Do not wrap the cord around the appliance, as this will cause damage.
* Keep the appliance in a cool, dry place.
ENVIRONMENTAL PROTECTION
(Destruction of Ni-MH or Ni-Cd batteries)
The appliance must be disconnected from the main power, when the battery is removed.
To remove the battery:
• Remove the two screws located in the upper part,
• Remove the screws at the back under the plate.
• Disassemble the two parts of the unit and remove the battery.
- THE BATTERY MUST BE REMOVED BEFORE THE UNIT IS GIVEN TO REBUS.
- THE BATTERY MUST BE ELIMINATED IN A SAFE WAY.
For additional protection, the installation of a residual current device with a rated residual
operating current not exceeding 30 mA is advisable in the electrical circuit supplying the
bathroom. Ask your installer for advice.
CAUTION: If the electric cable is damaged, it must be replaced by the manufacturer, his
after-sales service or people with similar qualification, in order to avoid any danger. In
order to minimize the risks of electric shock, In the event of breakdown, not to open the
case but to call upon a qualified technician for repairs.
This apparatus satisfied EC directives; it was controlled according to all the European
current directives, like: electromagnetic compatibility (EMC) and low tension (LVD). This
apparatus was designed and manufactured in respect of the last safety regulations and
technical specifications.