Sinbo SP 5209, User Manual

Page: 12 / 30

performance of the pan.
• During the first use, you might notice a slight smell (caused by coating or dusts) which
is absolutely normal. Provide sufficient ventilation and the smell will go away in subsequent
uses.
• Use the steam outlet on the cover to control the steam formation inside the pan.
• Do not place any flammable materials on the pizza pan.
AFTER USE
1) After use, switch the setting button to 'Off' position.
2) Disconnect from the plug and remove the automatic
temperature regulator from the pan.
3) Do not pull the cable to unplug the appliance, hold
and pull from the socket.
WARNING: The tip of the temperature regulation
thermostat gets very hot during use. Allow for the pan to cool down before removing
this piece.
4) Clean the pan with a dry and soft cloth after cooling.
5) Be careful when handling the glass cover. Do not cool it rapidly and do not use it if you
notice apparent scratches and/or cracks on the surface.
When handling the pan, please observe the following:
The surface of the pan is non-sticking teflon, therefore:
• Don't use any sharp pointed objects.
• Only use wooden or heat resistant plastic utensils in order to avoid damage to the
coating.
• Do not use a sharp knife to slice foods while they are inside the cooking plate.
Use another plate for slicing.
• Do not leave the temperature regulating thermostat on the pan.
• Do not use plastic or metal brushes for cleaning. These materials will cause abrasion
on the pan surface. Clean the pan using a damp cloth after use.
The remaining frying oil and other food remains may cause risk of fire.
INFORMATION ABOUT USAGE FAULTS
Only use the specified voltage for the appliance. Check with your local voltage to see if
they match.
To avoid any risk hazards, a damaged power cable must be changed by the manufacturer,
service organization or a likewise qualified technician. Do not attempt to open the device
yourself in case of a
failure, contact our maintenance center or after sales service.
Do not attempt to repair the device yourself. Doing so will void your warranty and our
company will assume no responsibility for resulting failures.
- 11 -