- 7 -
TECHNICAL SPECIFICATIONS
1. Maximum capacity 1 L
2. Indicator light for operation
3. Practical operation
4. 304 quality stainless body
5. Concealed resistance
6. Dry run protection
7. Easy to clean
8. Cord wrapping slot
9. AC220-240V, 50/60Hz, 1000W
CAUTION!
The values provided with the appliance or its accompanying documents are laboratory
readings in accordance with the respective standards. These values may differ depending
on the use and ambient conditions.
BEFORE FIRST USE
* Read all the instructions and keep for future reference.
* Remove the entire package.
* Firstly boiled water shall be emptied.
USAGE INSTRUCTIONS
* Before using the water heater for the first time, fill it with only cold water and boil
twice.
* Fill the kettle so that the water level is at the MAX. line.
* Do not use the appliance for anything other than boiling water. Other liquids will
contaminate the interior of the kettle.
Do not fill over Max. level. Overfilling may cause water to spill over during boiling.
* To operate the appliance, plug it in and press the on/off button. Operation indicator
light will turn on indicating that the kettle is in boiling phase. To turn off your water heater
before the water is boiled, press the off buttton.
* If you wish to use the kettle again, allow heat safety circuit to cool down for 15-20
seconds and then plug it to the lighter inlet again.
* Since the lid and surface will be hot, hold the kettle only by its handle.
* After use, leave the kettle on a heat proof surface.
* If the kettle accidentally turns on when it is empty, heat adjuster will automatically turn
off the device in order to prevent it from overheating. If this is the case, unplug the power
cord and allow kettle to cool down before refilling.
* When the device is not used, it is recommended that the power cord is unplugged.