Sinbo SHD 7060, Instruction Manual

Page: 3 / 11

- 2 -
IMPORTANT SAFEGUARDS
running water, or allowed to become wet.
10. Do not use the hair dryer for purposes other than drying and styling human hair.
11. Do not pull the cord with unnecessary force. Do not wrap the cord around the unit.
Check cord regularly for any sign of damage. Damaged cords can be dangerous.
12. If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
13. Always switch the appliance off before putting it down, even if it is only for a moment.
14. Always unplug the appliance after use.
15. Clean the appliance after use to avoid the accumulation of grease and other residues.
Drying
1. Put the plug in the wall socket.
2. Switch the appliance on by selecting the desired setting.
The airflow and temperature can be adjusted:
(1) After drying hair, can use the cool button to set style with a continuous flow of cool
air.
(2) Dry your hair by making brushing movements while holding the dryer at a small
distance from your hair.
Instruction for switch
0=appliance off
Nether 1+upper 1= low speed & heating
Nether 1+upper 2= low speed & higher heating
Nether 1+upper 3= low speed & highest heating
Nether 2+upper 1= high speed & low heating
Nether 2+upper 2= high speed & higher heating
Nether 2+upper 3= high speed & highest heating
Only cool button, = puniness cool air
Styling attachments
Concentrator
The concentrator enables you to direct the airflow at your hair that you are styling.
Connect the concentrator by simply snapping it onto the appliance. Disconnect it by
pulling it off.
Cleaning
1. The appliance can be cleaned with a dry cloth.
2. The attachments can be cleaned with a moist cloth or rinsed under a running tap.
Remove the attachments from the appliance before cleaning them. Make sure the
attachments are dry before using or storing them.
Never rinse the appliance with water.