Sinbo SHD 7040, Instruction Manual, Page: 3 / 10

- 2 -
HOW TO USE
• Make sure that your hands are completely dry before plugging in.
• Plug in and set switch to the required position
• Once your hair is dry set the switch ‘‘D’’ off 0 and unplug the dryer.
Heater switch:
Position low temperature
Position medium temperature gentle drying and shaping
Position high temperature for repaid drying
Speed switch:
Position off
Position gentle stream of air
Position strong stream of air
Cool switch:
With this switch you can stop the heating process
CLEANING
WARNING- Always unplug your appliance before cleaning.
Your hair dryer requires very little attention. You can clean it,
together with its accessories using a slightly damp cloth to remove
hair or impurities trapped in the rear grid.
• Never clean your appliance with alcohol.
• Never immerse your appliance or its accessories in water.
• Carefully dry all parts you have just cleaned.
SAFETY
• Ensure that the air inputs and outputs are not blocked.
• If that does happen, thermal temperature limiter guards against overheating.
KEEPING / CLEANING /CARE
Child not use the appliance alone when adult not in locale;
- When hand is wet it don’t use the appliance
- When find cord destroy don’t use and muse be send to professional service
- When the appliance is using don’t jam in wind-in lid so as towel, clothing.
• Please always disconnect your dryer before cleaning.
• Please do not put the appliance into water.
• Please clean the dust and hair by brush termly.
• Please clean the appliance with a slightly damp cloth and dry it up with a dry cloth.