Sinbo SHB 3107, Instruction Manual

Page: 9 / 22

- 8 -
fumes.
12) Keep the blender out of the reach of children.
NOTE: Never process very hot liquids. This is dangerous. DANGER OF SCALDING!
ELECTRICAL INFORMATION
Before using this appliance ensure that the voltage of your electricity supply is the same as that indicated
on the rating plate of the appliance.
WARNING: If the mains power cord is damaged in any way it must be replaced by a qualified technician.
SPECIFICTIONS
Model: SHB3107 (Hand blender Set)
Power: AC230V, 50Hz, 1000W
Recommended Duty Cycle:
1 minute ON; 1 minute OFF for Stick Blender & Whisk functions.
15 seconds ON; 15 seconds OFF for Processor Bowl related functions.
KNOW YOUR HAND BLENDER
This Hand Blender is designed to blend the vegetable or fruit with liquid, and to chop the meat, and to
slice /shred the carrot etc. and to beating the egg white. and have adjustable speed and turbo speed
for selecting.
HOW TO USE YOUR HAND BLENDER
1. How to use the Stick Blender:
- Cut the vegetable or fruit into smaller cubes (about 2x2x2cm max), and add these cubes with suitable
amount of liquid (water, juice, milk etc.) into blending cup.
- Assemble the Stick Blender onto Main-unit according to the marks properly.
- Connect the appliance into power source.
- Place the Stick-Blender into the food, and press the ON/OFF-button or Turbo-button, the appliance
will start working. Speeds could be adjusted by dialing the Adjustable-Knob under “Speed-Control”
mode, and will reach the maximum speed once Turbo-Button is pressed.
Warning: While operating sticker blender, do not run this appliance continuously more than 1min per
cycle. Do not put stick knife, metal spoons, fork etc. into blending-cup when operating.
2. How to use the shredding/slicing blade.
- Assemble the Shredding/Slicing blade onto The Disc-bracket.
- Put the Disc-bracket in the Cup, and then assemble the cup-cover.
- Assemble the Main unit according to marks properly.
- Connect the appliance into power source.
- Press the Speed-control or Turbo-button, the appliance will start working.
- Push the food (carrot etc.) through feeding chute with the provided pusher
Warning: While operating shredding or slicing blade, do not run this appliance continuously more than
15secs per cycle.
3. How to use the Chopping blade:
- Put the chopping blade into the bowl.
- Cut the meat into smaller cubes (about 3x3x3cm max), and put the meat into bowl and assemble the
cover.
- Assemble the Main unit according to marks properly.
- Connect the appliance into power source.
- Press the Speed- control or Turbo-button, the appliance will start working.