Sinbo sco 5033, Instruction Manual

Page: 17 / 68

WARNING
- 16 -
Do not hold the pressure release valve. Hot steam/liquid may be ejected.
Keep hands and face away from steam vents, use pot holders when removing the inner pot or touching any hot items,
and never force the lid open. The lid will only open once the pressure is released. Remove the lid by lifting it away from
you to avoid being burned by the steam.
CLEANING METHODS AND CARE
1. Unplug the power cord before cleaning.
2. Clean the outer body with a soft cloth such as a paper towel or microfiber cloth.
Do not immerse the outer body in water or pour water into it.
3. Remove and clean the condensation collector, then reinstall it. Clean the center ring with a wet towel.
4. Rinse with water the underside of the lid including the sealing ring, pressure limit valve, anti-block shield, air
escape and float valve. Dry completely.
5. To hand clean the cooking pot, use a sponge or a soft nonmetal brush and wipe.
Be careful not to damage the inside coating.
Regular care or maintenance is essential in ensuring that this product is safe for use.
When the following circumstances take place Solutions
-Power cord and plug suffer from expansion, deformation,discoloration, damages, etc.
-A portion of power cord or the plug gets hotter than usual.
-Electric pressure cooker heats abnormally, emitting a burnt smell.
-When power-on, these are unusual sounds or vibrations.
·Stop use the product immediately,send it back to your nearest customer service center.
·There is dust or dirt on the plug or socket
·Remove dust or dirt with a dry brush.