Sinbo SAH 6116, Instruction Manual

Page: 3 / 11

- 2 -
Proper Operation
• Place the body horizontally at a suitable place.
• Take out and overturn the water tank, screw off the tank cover, inject clean tap water.
• Connect the unit to power supply, turn on the power switch and the humidifying indicator
will be illuminated.
• There is no staged adjustment of humidifying capacity, which is set to the dryness of
your room.
• When there is no water in the water tank ,the built-in safety device will disconnect the
atomization circuit automatically, when there is no spray output from the spray nozzle
and the water depletion indicator is illuminated (two colors of the same indicator).To
continue the operation, please cut off the power and add water into the water tank.
Operating Precautions
• Do not add hot water of above 40˚C to the water tank and water bath to avoid discoloration
or distortion.
• Do not let water flow into the body from the air outlet. Wipe off any water outside and
the body with dry cloth.
• When the room temperature is below 0˚C, please empty the water tank and water bath,
let the icing of water should damage the components.
• Do not place metals, chemicals and detergents into the water bath, otherwise there
might be poor atomization.
• When there is much water in the water bath, do not move it about, otherwise water
might overflow and flow into the body to cause troubles.
• Do not put the unit at a place with strong light or direct hot air radiation.
• Do not place the unit at an airport and try to keep it away from furniture and electric
appliances.
• Do not add water into the water bath directly.
• When the unit is not to be used for a long time. Please cut off the power and unplug
the plug.
• Never pour out the water remaining in the water remaining in the water bath without
the power turned off, otherwise the transducer will be burned out immediately.
• When the water tank is fully loaded, the unit can operate for 7-12 hours continuously
without replenishment.
Cleaning /Maintenance
Always unplug the unit before removing the water tank. Do not touch the water in the
base during operation!
Caution - risk of electric shock and damage of the product.
• Switch off the appliance and unplug it from the socket before cleaning it.
• Clean the water tank and the base regularly. Use water only, no detergents.
• Cleaning and descaling agent only to remove deposits from the transducer regularly.