working LED
light sensor
This sensor is an active motion detector, it emits high-frequency
electro-magnetic waves, 5.8GHz and receives their echo.
The sensor detects the change in echo from even the slightest
movement in the light detection zone.
A microprocessor then triggers the “switch light ON” command.
Detection is possible through doors, panes of glass or thin walls
in most applications.
More reliable at distance than using IR or optical sensors, as
there are no gaps in the detection zone.
Model: LHT0182 Microwave Sensor
INSTALLATION INSTRUCTIONS
We strongly recommend that this sensor is installed by a suitably qualified and registered electrician.
Please read the entire Installation Manual and Calibration instructions before installing this product.
All electrical work must be carried out in accordance with local and national electrical codes as applicable.
Always switch power off prior to installation.
A means of power isolation must be installed on the circuit for the purpose of safe access for any internal
cleaning, recalibration or maintenance.
This appliance is not intended for installation or calibration by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given
supervision or instruction concerning its use by a person responsible for their safety.
There are no user-serviceable parts in this product.
Any changes or modifications made or attempted to this product without the prior written approval of the
manufacturer will void any and all stated warranties. This excludes normal calibration of the Reach, Time
and Light control setting knobs as described in these installation instructions.
IMPORTANT
!
Power supply:
220-240 VAC
Power frequency:
50Hz
Installation:
Indoors, surface mounting
Hf system:
5.8Ghz CW radar ISM band
Transmission power:
<10mW
Max rated load:
1200W 5A resistive (incandescent)
200W 2.5A (fluorescent and CFL)
Effective mounting height:
Up to 4.0 metres
Detection angle:
360°
Reach:
2 - 20m dia. Adjustable
Time setting:
5sec to 12min (approx)
Light control:
2~2000lux
Power consumption:
approx.0.9W
IP rating:
IP20
Temperature range:
-10°C ~ 55°C
TECHNICAL SPECIFICATIONS
!
Malfunction
Cause
Remedy
The load will not work
Wrong light-control setting selected
Adjust setting
Load faulty
Change load
Mains is switched OFF
Switch ON
The load is always ON
Continuous movement in the detection zone
Check zone setting
The load is ON
without any identifiable
movement
The sensor not mounted for detecting
movement reliably
Securely mount enclosure
Movement occurred, but not identified
by the sensor (movement behind wall,
movement of a small object in immediate
lamp vicinity etc)
Check zone setting
The load will not work
despite movement
Rapid movements are being suppressed to
minimise malfunctioning or the detection
zone you have set is too small
Check zone setting
TROUBLESHOOTING
Distributed by:
Simx Limited | Ph: 09 259 1660 | Technical Support Ph: 09 259 1662
Email: [email protected] | Web: www.simx.co.nz
Simx reserves the right to alter technical specifications without prior warning
PUB1163 iss03 11/14
This product is guaranteed by SIMX Ltd for 36 Months from the date of purchase against faulty materials
or workmanship which affects its designed ability to operate. During this period if the product has a
defect of this nature it will be repaired or replaced free of charge by SIMX with the same item, or a
similar one of higher specification. ON CONDITION THAT:
The buyer returns it to the seller from whom it was bought, freight paid.
The product has been bought by the user. ie a receipt/sales invoice is produced as proof of purchase.
The product has not been misused or handled carelessly, installed in anyway contrary to the installation
instructions, used on a supply voltage other than that indicated in the product specifications, or installed
in any unusually exposed or harsh environmental conditions.
This guarantee excludes liability for discolouration of paint or plastic, or any user serviceable parts. It
does not confer any rights other than those expressly set out above and does not cover any claims for
consequential loss or damage.
Our Goods come with guarantees that cannot be excluded under the New Zealand Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the Goods repaired or replaced if
the Goods fail to be of acceptable quality and the failure does not amount to a major failure.
MANUFACTURERS WARRANTY
