background image

INSTALLATION INSTRUCTIONS

Contents:

Tools required:

INSTRUCTIONS

MANUAL

X 1

X 1

X 2

X 2

Screw: 

M4x32mm   

Screw peg:

 6x30mm

X 2

Screw: 

M3x12mm   

X 1

X 2

X 2

Hand screw

Star washer

This product is suitable for use only with a supply voltage of 220-240V AC 50Hz.

All electrical work must be carried out in accordance with local and national electrical codes as 

applicable. We strongly recommend that this light fitting is installed by a registered electrician.

Always switch power off prior to installation. A means of mains power isolation must be installed on the 

circuit for the purpose of safe access for any internal cleaning, recalibration, or maintenance.

This light fitting is not intended for use by persons (including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a person responsible for their safety. Young children 

should be supervised to ensure that they do not play with the appliance.

Any changes or modifications made or attempted to this product, without the prior written approval of 

the manufacturer, will void any and all stated warranties.

IMPORTANT

X 1

Manual

U bracket

Cable clamp

Tools / Equipment need for installation. 

Thank you for purchasing this SIMX REFLECT LED Floodlight. 

This light is suitable for outdoor use and requires a 220 - 240V AC power supply. 
Please read this manual thoroughly before installation and retain for future reference. 

TECHNICAL SPECIFICATIONS

Distributed by: Simx Limited

Ph: +64 9 259 1660  |  Technical Support Ph: +64 9 259 1662

Email: [email protected]  |  www.simx.co.nz

Simx reserves the right to alter technical specifications with prior warning

PUB1300 iss01

PRODUCT COMPLIANCE

Product tested and complies to:

EN55015:2006/A1:2007   EN61000-3-2:2006   EN61003-3:2008
EN 61547:1995/A1:2000   IEC 61000-4-2:2008   IEC 61000-4-3:2006/A1:2007
IEC 61000-4-4:2004   IEC 61000-4-5:2005  IEC 61000-4-6:2008
IEC 61000-4-8:1993/A1:2000   IEC 61000-4-11:2004   EN 60598-1:2008
EN60598-2-5:1989   EN61347-2-13:2006    AS/NZ 60598-2-1
EN62493:2010   EN62031  IEC/EN 62471   IEC/TR62471-2
and relevant amendments.    

Product Name

LHT 0271 

LHT 0272
LHT 0273 

LHT 0274
LHT 0275
LHT 0276

Product Weight (KG)

Product Dimension (mm)

Maximum Projection Area

0.67KG

0.48KG

0.93KG

98(L) X 122(W) X 111(D)mm

170(L) X 122(W) X 111(D)mm

222(L) X 141(W) X 111(D)mm

80mm X 60mm

152mm X 60mm

201mm X 79mm

 

MANUFACTURERS EXTENDED WARRANTY

This product is guaranteed by SIMX Ltd for 36 MONTHS from the date of purchase against faulty materials or 

workmanship which affects its designed ability to operate. During this period if the product has a defect of this 

nature it will be repaired or replaced free of charge by SIMX with the same item, or a similar item, or a similar 

one of higher specification. ON CONDITION THAT:

The buyer returns it to the seller from whom it was bought, freight paid.

The product has been bought by the user. ie a receipt/sales invoice is produced as proof of purchase.

The product has not been misused or handled carelessly, installed in anyway contrary to the installation 

instructions, or installed in any unusually exposed or harsh environmental conditions.

This guarantee excludes liability for discolouration of paint or plastic, or any user replaceable parts. It also 

excludes any liability for labour cost claims associated with repair or replacement of the affected product. 

It does not confer any rights other than those expressly set out above and does not cover any claims for 

consequential loss or damage. 

Our Goods come with guarantees that cannot be excluded under the Australian and New Zealand Consumer 

law. You are entitled to a replacement or refund for a major failure and for compensation for any other 

reasonably foreseeable loss or damage. You are also entitled to have the Goods repaired or replaced if the 

Goods fail to be of acceptable quality and the failure does not amount to a major failure.

Supply Voltage:

                    220 - 240V AC 50Hz

Power Factor: 

                      >0.92

Working Temperature:

         -20°C to +40°C

Environmental Protection:

  IP55 (suitable for indoor 

                                               and outdoor use)

Protection Class:

                 Class II

Construction:  

   

          

Luminous Flux:

        500lm      1000lm      1500lm

12W         20W           26W  

Alloy Housing.
Stainless Steel 304 B Screws,             

UV Stabilised Polycarbonate  

 

LHT 0271

LHT 0272

LHT 0273

LHT 0274

LHT 0275

LHT 0276

12W

20W

26W

Black

White

Black

White

Black

White

Reviews: