If the Receiver does not sound, please check the following:
• Flat batteries in either the Transmitter or Receiver -change the battery.
• Wrong battery polarity in either the Transmitter or Receiver-reinsert the battery.
• Units are out of range-relocate the Receiver within the operation range.
• If leaving the chime unused for long periods, remove the battery from devices to prevent leakage.
• Dispose of old batteries in accordance with the relevant legislation.
USER HINTS
TECHNICAL SPECIFICATIONS
ELECTRICAL COMPLIANCE
Receiver
Battery (not included)
3 x AA 1.5V Alkaline batteries
Operating Frequency
433.92 MHz
Operating Range (Free Air)
Up to 80 metres
Sound dB(A)
60-85 dB(A)
Transmitter
Battery (included)
1 x 23A12V battery
Enclosure rating
IP44 – sheltered exterior locations only
Operating Temperature
-20°C to +40°C
4
This product complies to all relevant NZ/AU compliance standards.
An SDOC (supplier compliance declaration) is available on www.simx.co.nz
Type the product code into Search on the home page, this takes you to the item product page,
a download link is located below the product details on that page.
IMPORTANT: PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE
REFERENCE WHEN REPLACING BATTERIES
USER HINTS
Distributed by:
Simx Limited
Ph: +64 9 259 1660 | Technical Support Ph: +64 9 259 1662
Email: [email protected] | www.simx.co.nz
PUB1720 2112
