If the Receiver does not sound, please check the following:
• Flat batteries in either the Transmitter or Receiver-change the battery.
• Wrong battery polarity in either the Transmitter or Receiver-reinsert the battery.
• Units are out of range-relocate the Receiver within the operation range.
• If leaving the chime unused for long periods, remove the battery from devices to prevent leakage.
• Dispose of old batteries in accordance with the relevant legislation.
USER HINTS
TECHNICAL SPECIFICATIONS
Receiver
Battery (not included)
3 x Type C Alkaline batteries
Operating Frequency
433.92 MHz
Operating Range (Free Air)
Up to 120 metres
Sound dB(A)
90 dB(A) on High setting
Transmitter (PIR)
Battery (not included)
3 x Type AAA Alkaline batteries
Enclosure rating
IP44 – sheltered exterior locations only
Detection range
6 metres x 80 degrees (varies by local conditions)
Operating Temperature
-20°C to +40°C
5
There is a DC input jack on the top right hand side of the receiver. You can connect a power adapter
to this port, provided it matches the power requirements as specified.
Don’t use batteries and the DC input at the same time: there is a risk of battery
leakage or explosion.
Remove any batteries
before
connecting the DC input!
The power requirements are: 6V, 200mA
• SIMX Ltd do not sell this component.
• Most good electronics stores have power adapters suitable for the Driveway Alert Alarm.
• Be sure to match the power requirements exactly. Using anything other than a 6V power adapter
will have undesirable (and potentially dangerous) results.
• Don’t cut, open or modify any electrical equipment, cables or housings.
• Use only an adapter suitably rated for the intended purpose.
USING A POWER SUPPLY-OPTIONAL
