We strongly recommend this light fitting is installed by a registered electrician
Switch off the power supply before commencing any electrical work.
Use the mounting bracket to mark the position of screw holes on the mounting surface.
Drill screw holes to depth of 3cm (approx) and fit wall plugs (not supplied). Care should be taken to avoid
drilling or screwing into concealed electrical wiring/plumbing. Screw the bracket to the mounting surface (screws
not supplied). Use the bolts and washers supplied to attach the Chameleon Flood light to bracket (Fig. 1)
Terminate power supply to the factory fitted power cable (Fig. 1). To maintain IP rating this requires an IP55 or
higher rated junction box (not supplied).
Switch power supply on and test circuit.
Insert batteries into the remote and refer to settings to configure light temperature and brightness.
INSTALLATION
SETTINGS
Fig. 1
REMOTE CONTROL
Operates on 2x AAA Batteries (Not included)
Range up to 30m free air
Colour Temperature: 3K/4K/5K
Dim: 10 - 100%
UNIT CONTROL
On/Off/Colour temperature select button is
located on the rear of the unit. Continue pressing
the select button to alternate between OFF and
either 3K/4K/5K Colour Temperature.
3K
OFF
OFF
OFF
4K
5K
L
= Brown or Red
= Green / Yellow
N
= Blue or Black
3K 4K 5K
On/Off
Color
Dim
3K Warm White
4K Cool White
5K Neutral White
