CHAMELEON FLOOD
LHT1096 - LHT1097
Single 20W LED Colour-Select & Dimmable Floodlight
INSTALLATION INSTRUCTIONS
This product is suitable for use only with a supply voltage of 220-240V AC, 50/60Hz.
All electrical work must be carried out in accordance with local and national electrical codes as applicable.
We strongly recommend that this light fitting is installed by a registered electrician.
Always switch power off prior to installation. A means of mains power isolation must be installed in the circuit
for the purpose of safe access for any internal cleaning, recalibration, or maintenance.
This light fitting is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Young children should be
supervised to ensure that they do not play with the appliance.
Any changes or modifications made or attempted to this product, or product installed contrary to these
installation instructions without the prior written approval of the manufacturer, will void any and all stated
warranties. The light source of this luminaires is not replaceable; when the light source reaches its end of
life, the whole luminaire must be replaced
IMPORTANT
!
Thank you for purchasing this Chameleon LED light fitting.
This product is suitable for outdoor use. A 230V AC power
supply is required and installation should be completed by a
registered electrician.
TECHNICAL SPECIFICATIONS
REPLACEMENT PARTS
Remote Controller
LHT1108
Power Source
220-240V AC
Rated Load
20W
Lumens
1300 - 1500 lm
Colour Temperature
3000K/4000K/5000K
IP Rating
IP65
Mounting
Wall or ceiling
Construction
Aluminium alloy, heat tempered
glass
lens
Safety
Class
I
Warranty
3 years
