System Set Up
|
15
PacerMan System
Concentrate (2 oz)
Prepare Fluid System
(continued)
Replace the head and torso cover.
PacerMan is powered by battery or
wall power. To connect the battery,
place it in the battery well that’s
located under the torso cover.
Put the torso cover back on and the
cord will fit through the mouse hole
as shown. Plug the battery cord into
the port labeled DC IN on the panel.
For wall power, plug the Wall Power
Supply into the DC IN port and plug
the other end into the wall.
Then turn the power switch on and
turn the Valve to the IN USE position.
CONNECT TO POWER
6
Mouse hole
Dial
DC IN
Power Switch
NOTE:
The System requires the valve to be
in the “In Use” position while using
the System.
