TLU 600/610
Page 4/20
NOSP 14540-04 (JULY 2011)
1.2.
1.2.
1.2.
1.2.
F
F
F
F
UNCTIONS
UNCTIONS
UNCTIONS
UNCTIONS
The TLU 600/610 universal remote controller is used to exchange data with the remote
sensor. This dialogue is based on a tree of on-screen menus and the use of function
keys.
It simplifies every operation connected with maintenance, calibration, etc. The amount of
usable functions will depend upon the remote sensor involved. For example, with the
DMITT, DMITO, DMTT, DMTX and DMTK family of remote sensors, the remote controller
can be used to calibrate, read current status, measure current, etc. For the flame
detector, the remote controller can be used to stimulate a flame detection.
Similarly, the language used in these exchanges (French, English, etc.) will be that used
by the remote sensor (except for the welcome screens).
From the Serie 63 of remote sensor, functions are password protected through various
levels. The pass word used for the switching on of remote controller gives access to
authorized functions.
The remote sensor and remote controller communicate by an infra-red link.
Communication is therefore always by “line of sight”, i.e. there must be no obstacle
between the remote sensor and the remote controller.
The average communication distance is about 6 meters.
