Simrad V5035, Operator And Installation Manual

Page: 40 / 118

40 |
Operation | V5035 Operator and Installation Manual
TRANSCEIVER (Setting for AIS receiving and sending)
AIS TX
Transceiver status: turn on or off AIS message
transmitting
DSC RX DSC Monitor: turn on or off DSC monitoring
function
GPS ANT. VOLTAGE GPS antenna feeding voltage: set to 3.3V or
5V
Note:- Antenna supplied with unit is a 3.3V
unit
SYSTEM CONFIGURATION
CUSTOMIZE Personalization settings
RADAR VIEW
Radar configuration
MAP CALIBRATION Map offset setting
SENSOR CONFIG. Port configuration
FACTORY Default factory setting
PASSWORD
Password change (default password: 0000)
LONG RANGE SET. Remote inquiry setting
LR BCST SET. Enable/Disable Long Range Broadcast
DEST TABLE SET. Table storing destinations
ALARM SETTING
Configure ALR sentence status (Enable/Dis-
able)
VSWR SETTING VSWR setting
DIAGNOSTICS
SYSTEM ON/OFF Device activated log
MEMORY TEST
Memory test
SENSOR PORT Transmission port test
TFT-PANEL Screen panel
KEYBOARD TEST Button test
GPS STATUS
GPS positioning status
TRANSCEIVER Transponder status
COMMUN. TEST Test communication
PANEL TEST Test Panel
VERSION
Firmware version