Simrad TV80, Reference Manual

Page: 137 / 306

406388/B
135
Recording and replaying sensor data
Topics
Defining the folder settings for data recording, page 135
Accessing the saved data files, page 136
Recording sensor data, page 137
Selecting Replay mode, page 138
Defining the folder settings for data recording
The TV80 allows you to save some relevant and useful data files like screen captures, screen
captures of the current spectrum or even some views you created. In
File Setup
you can
define the destination folders for every file you can save with the TV80.
Context
The
Record
function allows you to record the data submitted by the catch monitoring
sensors. The data are saved on the Processor Unit hard disk - or on an external data storage
device - according to the preferences you have defined. Information about the data and time
of the recording is added automatically to the file name.
Tip
Data files will normally become very large. If you wish to record large amounts of TV80
data, make sure that you have enough space on your hard disk. Unless your Processor Unit
is equipped with a very large disk, we recommend that you save the data to an external
storage device.
Set up the folder parameters before you start the recording. If you wish to save your
recorded data on an external hard disk, make sure that it is connected to the Processor Unit.
The
Record
function is located on the
Operation
menu.
Procedure
1 Select the
Operation
icon.
The icon is located under the
Main
menu. It is used to open the
Operation
menu.
Operating procedures