Simrad TV80, Reference Manual

Page: 134 / 306

132
406388/B
Saving and recalling screen captures
Topics
Saving a sensor screen capture, page 132
Saving a screen capture from the Spectrum dialog box, page 133
Accessing the screen capture images to delete, move or copy them, page 133
Saving a sensor screen capture
When you use the TV80 actively, you may need to make a screen capture to save an
instantaneous image of the current presentation. The screen captures you make are saved on
the hard disk in the Processor Unit on JPG format.
Context
On the TV80, you can save and recall echo information using the following methods and
formats.
• The screen captures you make are saved on the hard disk in the Processor Unit on JPG
format.
• Raw data is recorded using the
Record
function on the
Operation
menu. To play back
data, use
Operation
to select Replay mode.This mode allows you to replay previously
recorded data on the TV80. When in Replay mode, the TV80 is not able to receive any
data. For this reason, the TV80 is inactive during playback.
Procedure
1 Observe the
Screen Capture
button on the top bar.
2 Select
Screen Capture
to make a copy of the current TV80 presentation.
Every time you do this, a new image file is created.
Result
The screen captures you make are saved on the hard disk in the Processor Unit on JPG
format. Each capture includes the entire visible presentation. It includes the current
echograms and the menu.
Simrad TV80 Reference Manual