Simrad TV45, Manual

Page: 12 / 176

English-12 Simrad Marine TV
2.3 Power on / off / standby
The antenna unit is controlled by the control unit, which is turned on by press-
ing the (power) key. To enter Standby mode, press the key from any menu
after the initialization is completed.
When the control unit is in standby mode there will be no power supply to
the antenna.
2.4 Adjusting the setup parameters
Modifications can only be made in the setup menu. In the main menu only the
flashing functions can be selected.
1. Turn on the control unit. The display shows
Init
(flashing), meaning ini-
tialization is in progress.
2. After the initialization is completed, you are in the main menu with the
display flashing
Setup
. The setup menu has password access - see section
1.5.
3. If the password is entered correctly, you are now in the setup menu. The
display shows
Tracking
, press to select.
4. Tracking is preset to On. Toggle between On and Off with the key. With
Off, tracking is deactivated (see section 3.1). With On, tracking is activated
i.e. the satellite can be tracked. Press
to select.
5. The display shows
Tracking
. Press to go to
FastScan
mode. Press
to select or to continue from point 7.
6. Fastscan is preset to On. Toggle between On and Off with the key (see
section 5.4). With On, Fastscan is activated i.e. the search for the correct
satellite works faster (US only). Press
to select.
7. The display shows
FastScan
. Press to go to
LNB Type
. Press to
select.
8. The display will show the standard setting
lin 0
which is valid for
Europe. By pressing the key you can change the LNB settings. Press
to select. The display will return to:
LNB Type
.
The standard setting
lin 0
is the only one supported by a standard system.