Make a safe copy of your data stored in the memory of
your GN30 MKII, or make a copy of only the way-
points you have saved in the memory. It is not possible
to transfer data from the Setup displays. ’Datadump’
will transfer a copy of all user data to the receiving
unit. ’Send waypoints’ will transfer a copy of all the
waypoints in the memory to the receiving unit via the
waypoint sentence WPL (NMEA 0183).
The ’Data transfer’ window will present the various
methos available:
,OAD $ATA TRANSFER WINDOW
*) Not available in
software version
3.03.
(3$ ,INK DATADUMP
- refer to section 5.1.5.
$ATADUMP OR 3END WAYPOINTS TOFROM COMPATIBLE
UNIT
Using the optional Remote cable 104.3000.002 or alter-
native cable as specified below, connect the cable to
the REMOTE port on both units i.e.
Sender: Pin 1 (TX A) to Receiver: Pin 3 (RX A)
Sender: Pin 2 (TX B) to Receiver: Pin 4 (RX B)
$ATADUMP TOFROM 0#
A transfer cable can be made from the NMEA cable
and e.g. a 9-pin D-SUB connector. Connect cable to
$ATA TRANSFER
KEYS TO PRESS
3,9
MENU
Data transfer
1:HSD Link datadump (REMOTE)
2:Data dump (NMEA)*
3:Data dump (REMOTE)
4:Send waypoints, WPL (NMEA)*
5:Send waypoints, WPL (REMOTE)
Exit: MENU
'. -+)) 7AYPOINTS AND NAVIGATION
#HAPTER
61
Summary of Contents for Shipmate GN30 mkII
Page 70: ...HAPTER 3ETUP 70...
Page 92: ...PPENDIX LOSSARY OF TERMS 92...
