| 19
Installation |
NAIS-400 Instruction Manual
Route the cable to your AIS transceiver unit, adding any necessary
extension cables. Connect the cable from the GPS antenna to the
GPS connector on the AIS transceiver as shown in Figure 8.
Power and data
GPS antenna
NMEA 2000
VHF antenna
Figure 8 Position of the GPS antenna connector
Step 3 - Connecting the VHF antenna
Route the cable from the VHF antenna to the AIS transceiver and
connect to the VHF connector on the AIS transceiver as shown in
Figure 9.
A standard marine band VHF antenna or AIS antenna should be
used with the AIS transceiver. The connector type on the AIS
transceiver is SO239. Your chosen VHF antenna requires a PL259
connector to mate with this. If your VHF antenna does not use this
type of connector, please contact your dealer for details of available
adaptors.
Power and data
GPS antenna
NMEA 2000
VHF antenna
Figure 9 Position of the VHF antenna connector
