background image

Specifications | 27

MX521B D/GNSS Receiver

Key features:

•  IMO type approved
•  Flexibility for easy integration into NMEA 0183 interfaces
•  More satellite tracking for better geometry
• 

Maintain position lock when more of the sky is blocked

• 

COAST technology maintains differentially-corrected 

positioning for 40 minutes or more after loss of differential 

signal

GNSS Sensor Specifications

Receiver Type:  .......................................... GNSS L1 Receiver 
Signals Received:  .......................................... GPS, GLONASS 
Channels:  ..................................................................... 270
GPS Sensitivity:  .................................................... -142 dBm
SBAS Tracking: ............................. 2-channel, parallel tracking

Update Rate: ............................ 1 Hz standard (20 Hz optional)

Positioning Accuracy:

RMS (67%): 

 

 

Horizontal  

Vertical 

Single Point: 

 

 

 

1.2 m    

2.5 m 

SBAS (WAAS): 

2

    

 

0.3 m    

0.6 m 

Code Differential DGPS: 

3

   

0.3 m    

0.6 m

Compass Safe

Distance:  ......................................... 75 cm (with enclosure) 

4

Cold Start:  ......................................60 s (no almanac or RTC)
Warm Start:  ............................20 s typical (almanac and RTC)
Hot Start:  ....................1 s typical (almanac, RTC and position) 
Maximum Speed:  ....................................1,850 mph (999 kts)
Maximum Altitude:    ............................... 18,288 m (60,000 ft)

Summary of Contents for MX521









































Reviews: