manualshive.com logo in svg

Simrad GN33, Manual

Share
Download
Simrad GN33 Manual Download Page 84

Chapter 6-10 

GN33 Pilot menu & navigation examples

6.5 Navigation examples

6.5.1 Chart/cursor navigation.  6.5.2 Waypoint navigation.
6.5.3 Route navigation. 

6.5.4 Track navigation.

Relevant for all navigation modes are:

- the highway display with graphical steering - section 6.2.1.

- the ETA & AVN display with Estimated Time of Arrival and 
  Approximate Velocity Necessary to reach a given point at a specific 
  time - section 6.2.6.

- the *Trim & highway display with information on actual and mean 
  speed over ground, velocity (VMG) and water speed - section 6.2.7.

- the *Set & drift display with indication of how fast the current 
  is moving in knots, in what direction (true) it is moving and what 
  direction in relation to the vessel (relative) - see section 6.2.8.

* These readings rely on data from external log and compass.

With the [PILOT] key you can toggle between:

PILOT

   

 

       

    

 

   

 

 

 

 

6.5.1 Chart / cursor navigation

Cursor navigation is the easiest and most straightforward way of 
navigation - point and go!

CHART

 Shortcut 

to 

chart 

display

Summary of Contents for GN33

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands