Operational procedures
4
Method 2:
a
Click the middle of the
TVG
button to open the sub-menu.
b
Click on any TVG setting to select it.
Power and pulse duration
These procedures explain how to control the output power and transmission pulse
duration.
Topics
•
on page 97
•
How to change the output power
on page 98
•
How to adjust the pulse duration
on page 98
Related topics
•
on page 112
•
on page 113
How to choose passive mode
In order to check how much noise the ES70 is receiving, set it to passive mode. This
means that the ES70 is not transmitting sound pulses into the water, it is only “listening”.
1
Click the
Operation
icon under the
Main
menu to open the
Operation
sub-menu.
→
on page 104
2
Click
Normal Operation
to open the
Normal Operation
dialog.
This dialog is used to define various parameters associated with the transceiver.
These settings include transceiver mode, the depth of the transducer surface, the
transmit power, and the pulse duration. Note that this dialog is not available in
Replay
mode.
343539/B
97
Summary of Contents for ES70 - DOWNLOAD AND INSTALLATION REV B
Page 2: ......
Page 128: ...ISBN 13 978 82 8066 118 0 2010 Kongsberg Maritime AS ...
