Simrad ES200-7C - REV E, Installation Manual

Page: 37 / 52

Transducer handling and maintenance
Figure 6 Example of use
(CD017020C)
Note
In the case of tapping through holes it is important that the
profile of the
Emuge self-lock
threads is in the correct direction
compared with the entering direction of the bolt.
Gauge
Use
Emuge self-lock
gauges. Note that the gauge must be used
in the correct direction.
Self-lock taps provided by Simrad
The following self-lock taps are on stock at Simrad, and can be
ordered from us.
Threads Drill diameter for
threads Part.no
M6 ø5.2 700-078838
M8 ø7.0 700-078531
M10 ø8.8 700-078408
M12 ø10.7 700-078409
M16 ø14.5 700-078410
Supplier and manufacturer
Norwegian supplier is:
Tingstad AS, P.O.Box 83, Kalbakken, 0902 Oslo, Norway
http://www.tingstad.no
Manufacturer is:
EMUGE-Werk Richard Glimpel, Nurnberger Strasse 96-100,
D-90607 Lauf, Germany
http://www.emuge.de
307120/B
35