Simrad ARGUS FMCW 3G, User Manual

Page: 51 / 150

| 49
Basic operation | Argus Radar Operator Manual
Help O ff/On
Each button is labelled in order to visualize the main function it performs when pressed. If this
function is activated (Help On), further information is provided when hovering the cursor over
the buttons for more than one second. A help label will be displayed, enhancing the informa-
tion for the button where the cursor is positioned.
Ship outline beam
This setting is useful to override the standard behaviour described by IEC62388, only the
ships having a scaled beam >6 mm are displayed with proportional outline. This condition is
usually reached only in the lowest range scale. To permit a ship outline indication also in other
range scales, the limit can be set alternatively to >2 mm.
Layout
The Layout button will open the Layout Settings Menu that allows the operator to choose
the desired interface layout between a number of possible options (available options differ
according to the type of monitor in use).
For example, it is possible to have the System Data Menu on the left side, as shown in the
above image. The layout selection will be applied after clicking the “Accept” button and the
system has been restarted.
If the monitor has a wide screen, pressing the Layout button will also include the choice of
having a menu at both sides.