Simrad AP28, Operator'S Manual

Page: 57 / 126

Main menu | 57
Range Change per step Default
Off, 5-90° 1 Off
Alarm status
Displays a list of present alarms
Sources
A data source can be a sensor or a device connected to
SimNet providing data to other SimNet devices. Data can
be of different type such as compass data, apparent wind
data, calculated wind data, depth data, etc. A given data
type will only be provided from one device to the other
devices organized in a SimNet Source group (Ref.
Installation/ SimNet groups, page 100).
At the first time turn on of a group of SimNet
interconnected products (SimNet Source Group), data
sources are automatically selected from an internal
SimNet priority list. If a data source is connected to
SimNet after the first time turn on, this will be identified
and automatically selected if no other data source already
is selected for the given data type.
It is only required to update the SimNet source selections
if an alternative source is made available for a given data
type and this source has not been selected automatically.
The data types and their
respective data sources used in
the products are listed on the
source page in the products.
If no selection is made for a data type, ‘- - -‘ is displayed
instead of the device name or acronym.
SimNet will automatically select Position source and
Navigation source from the same GPS/Chart plotter. If
you want them to be different you have to change them
manually.