WinFrog User’s Guide - Appendix C - Output/Simrad 301 DP
Page 4 of 7
WINFROG VEHICLE TEXT WINDOW > CONFIGURE VEHICLE DEVICES > DEVICE
> EDIT OPTIONS:
The OUTPUT,SIMRAD301 DP, DP OUTPUT data item is added to the vehicle with the
DP system in use. This vehicle should also be tracking the Survey Line for which you
intend to send the relevant line data, to the DP system. If a Survey Line is not enabled,
or the device is not added to the vehicle, no line segment data will be transferred. The
dialog box below will appear when you attempt to configure the device, and send data
to the DP. This will not change until a tracking line is enabled and the device is added to
the vehicle.
When the SIMRAD301 DP, DP OUTPUT item is edited from the Configure Vehicle
Devices dialog box, the Configure DP Output dialog box appears. The Position Source
and the Position Offset tabs must be configured. These items configure the vehicle
position output as described in the type 450 record under Configuration Details.
Position Source:
Three items need to be configured on this tab: Data Type Control, Graphics, and
Data Source Control.
