Control and Display Panel
Connecting up the System
Step 1
Unpacking-
Choose a suitable countertop,
flat, secure, and out of easy reach of small
children. Allow space to access the removal
of the rear feed water tank. Place the drip
tray under the outlet.
The system is pre-fitted with the filter
cartridges for your convenience.
CF RO CB
Step 2
Fill water tank-
Open the cover of the feed
Indicates when the user needs to replace the filters.
Filtering
Indicates purifier is filtering water.
Change Water
Indicates feed tank water needs to be Discarded and refilled.
Maintenance
.
Indicates maintenance is required.
Reset
.
Indicates the filters are exhausted (also used to reset filter life).
Tea / Coffee /Room Temp / Baby Formula
Indicates the purified water dispense temperature selected.
Power
Indicators the system is on and ready to purify water.
See Page 11-12 for full detailed descriptions of each function
Step 3
water tank located at the back of the unit,
Lift the tank out from the rear of the system.
Fill with potable (tap) water, replace the
cover, and carefully fit the feed water tank
into the base.
Note: When refilling the tank, always
Discard
remaining water before refilling.
DO NOT exceed the "MAX" level.
Turn the system on -
Plug into an electrical
outlet. The blue power indicator will lighton.
The system enters a standby mode if not
used for 10 minutes. Note: There is no
power switch; Unplug the device should you
need to turn it off. Before use, all parts must
be adequately flushed, follow instructions,
System Flushing
(Page 9).
DO NOT CONSUME WATER UNTIL FLUSHING COMPLETE
7
8
POWER
