Simpson
Changing the light bulb/How to use the features of your refrigerator
This section tells you how to make the most of the refrigerator’s
many useful features and how to clean them.
Door Storage Bins (shelves)
Both the refrigerator and freezer have door storage bins. You can
adjust the refrigerator bins to meet different storage needs. All
the door bins are completely removable for cleaning. If you want
to remove or adjust a bin, lift and tilt to remove. To replace, fit top
and push bin down until support lugs to lock it in place.
Store Safe Compartment (where fitted)
You can use this compartment to store food and other items. To
operate lock, push up to open and down to lock.
Crisper Bin
Storing Vegetables
You can use the crisper bin to store vegetables, fruits or small
goods. You can change the humidity inside the bin by rotating the
humidity control.
You should store vegetables in the crisper bin, but remember to
set the humidity control to more humid (vent closed).
Storing Fruits & Small Goods
You can also store fruits in the crisper bin, but remember to set
the humidity control to less humid (vent open).
Deodoriser
Your appliance is fitted with a catalysing deodoriser to assist with
the removal of the food odours inside your refrigerator and
freezer. Keeping food covered and wrapping food with plastic
wrap will also help to reduce the odours inside your appliance.
How to use the features of your
refrigerator
Refrigerator
1. Switch off the power at the power point and remove the
refrigerator’s power cord from the power point.
2. Remove shelves.
3. Carefully unclip the light cover by pulling the top of the cover
towards you.
. Unscrew the light bulb and replace it with a bulb that is the
same wattage and type as the original.
. Replace the light cover.
. Replace shelves.
. Wait minutes to ensure pressure in the refrigeration
system are equalised. Then turn the refrigerator on at the
power point.
Freezer
(model STB3100WA only)
1. Switch off the power at the power point and remove the
refrigerator’s power cord from the power point.
2. Carefully unclip the light cover by pulling the top of the cover
towards you.
3. Unscrew the light bulb and replace it with a bulb that is the
same wattage and type as the original.
. Replace the light cover.
. Wait minutes to ensure pressure in the refrigeration
system are equalised. Then turn the refrigerator on at the
power point.
Changing the light bulb
