OPERATING INSTRUCTIONS
© C2009 SIMPSON STRONG-TIE COMPANY, INC.
T-QDBDT75INAU09
www.strongtie.com/products/quikdrive_au
READ BEFORE
SAVE THESE
OPERATING
INSTRUCTIONS
QUIK DRIVE
®
QDBDT75
GENERAL SAFETY RULES
Always read and understand the tool’s operator’s manual, tool
•
marking and the instruction package before starting any work.
Stay alert, watch what you are doing and use common sense when
•
using this tool.
Keep your work area clean and well lit.
•
Keep bystanders, children and visitors away when using this tool.
•
Do not use tool when you are tired or under the influence of drugs,
•
alcohol or medication.
Always wear eye protection when operating or servicing the tool.
•
When servicing the tool, use only identical replacement parts.
•
Follow instructions regarding maintenance in the tool operator
•
manual.
Maintain labels and nameplates. If unreadable or missing, contact
•
the manufacturer for a replacement.
SPECIFIC SAFETY RULES
While assembling system components, screwdriver motor should
•
be unplugged from power source.
Keep hands, feet and head away from the tip (screw outlet) of the
•
tool.
Tool can eject screw without being connected to motor or power
•
source.
Do not cycle attachment while pointed at any body part.
•
If a screw should become jammed in the auto-feed attachment,
•
immediately disengage the power source and point the tool in a safe
direction.
Flying Objects.
Wear approved
eye protection
when operating
this equipment
Rotating parts.
Loose clothes, jewelry
or long hair can be
caught in moving
parts
Sharp Objects.
Sharp objects can
puncture hand
and fingers
DRIVING SCREWS
Be sure screwdriver motor is
in FORWARD.
Start screwdriver motor
before applying pressure.
Apply pressure to keep bit
engaged until screw is fully
driven and clutch releases.
Keep screwdriver motor
running between screws.
QUICK START INSTRUCTIONS
Complete instructions inside
Screwdriver motor sold separately
Use with or without
the “Stand-up”
Extension
1.
2.
4.
3.
