8- ENG
qUICk SETUp GUIDE
WARNING:
To reduce the risk of injury, read the pressure washer instruction manual and
the engine instruction manual before operating pressure washer.
a
Install the handle
Slide the handle
assembly onto
the frame and secure with
saddle bolts and knobs.
B
Add/Check Oil
The engine is
shipped without
oil. Before starting engine,
add the oil provided.
Check oil level prior to
each use. Refer to
Engine
Owner’s Manual
for
complete procedure.
c
Add Gasoline
In a well ventilated
outdoor area
add fresh, high quality,
unleaded gasoline with a
pump octane rating of 86
or higher. Do not overfill.
Wipe up spilled fuel before
starting the engine. Refer to
Engine Owner's Manual
for complete procedure.
qUICk START GUIDE
DANGER:
• Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust con
-
tains carbon monoxide, an odorless and deadly gas.
• Risk of fluid injection and laceration. When using the high-pressure setting, DO NOT
allow the high-pressure spray to come in contact with unprotected skin, eyes or with
any pets or animals. Serious injury will occur.
1
Connect Garden
hose to Pump
Thread the garden
hose to the pump inlet.
See label #1 on unit.
2
Connect high
Pressure hose to
Pump
Connect the high pressure
hose to the pump outlet.
See label #2 on unit.
3
Connect high
Pressure hose to
Spray Gun
Connect the other end
of the high pressure
hose to the spray gun.
Please contact us for further information at www.allpartsinc.com