S T E P 4
Tilt Umbrella
To tilt canopy, loosen joint knob by turning counter clockwise and tilt canopy left to right
(Fig. 12). Turn joint knob clockwise to secure tilt position in place. To rotate canopy,
loosen joint knob by turning counter clockwise and rotate canopy front to back
(Fig. 13). Turn joint knob clockwise to secure canopy in place.
4
3
Loosen joint knob by turning counter clockwise (Fig. 8). Level canopy to a horizontal
position and turn slider cars downward (Fig. 9). Turn joint knob clockwise to secure in
place. Extend slider cars outward, one at a time, until they snap in place (Fig. 10).
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
(Fig. 13)
S T E P 2
Open Umbrella
Untie remaining canopy ties to free canopy. Loosen bottom pole knob by turning
counter clockwise (Fig. 5). With one hand on the bottom pole and a second hand on
the middle strut, pull upward to extend top pole (Fig. 6). Once desired height is
reached, tighten bottom pole knob by turning clockwise to secure in place (Fig. 7).
IMPORTANT:
Do not extend top pole past warning label located on top pole
approximately 26” down from top, 10” from bottom. Pulling top pole past warning label
will detach top pole from the bottom pole. If this occurs, simply insert top pole back into
bottom pole.
Joint Knob
Bottom Pole Knob
(Fig. 5)
(Fig. 6)
(Fig. 7)
Slider Car
Stopper Ring
Slider Car
S T E P 3
Positioning Canopy
To position canopy, loosen joint knob by turning counter clockwise and slide middle
strut between stopper rings for desired shade position (Fig. 11). Turn joint knob
clockwise to secure in place.
