ADD SOCKET
Follow a simple 5-step process:
1. Plug socket into outlet and ensure LED
indicator light turns on.
2. Open the Simply Conserve™ app and click
“Add a device” or “+” in the top right corner.
3. Select the icon that matches your new
socket.
4. Begin EZ Mode Pairing and confirm the LED
indicator light is rapidly blinking.
5. Select your Wi-Fi network and enter the
password. When finished, select “OK.”
Note: If experiencing issues in EZ Mode
Pairing, pair socket in AP Mode
(see page 3 for instructions).
Pairing with EZ Mode
Step 1
Starting with your device powered on, power off. Then, power back on by holding down the
power button until the LED indicator begins blinking rapidly (2 per second).
Note: You may need to repeat the on-off-on-off sequence until your device is ready to pair.
To ensure you don’t perform this sequence too quickly, wait until the light turns on before
turning off again.
STEP 4
SMART HOME USER GUIDE
SMART SOCKET
Page 2
