Tabletop Pedestal Enclosure
Model ZTP2
Figure 2
10. Install front cover (lid) of the enclosure, over the US2 switch,
to the base of the enclosure. From the bottom of the
enclosure, insert the two (6/32 x 1 ¼ inch) screws through
the two screw holes. Tighten screws to 3 Inch-pounds.
11. Install the strain relief grommet on the power cord as shown
in figure 3 and 4.
Figure 3
Figure 4
CONFIGURATION AND OPERATION
To configure and operate the Tabletop Pedestal and link it to one
or more UPB devices, please refer to the instructions for the
SimplyBrilliant, model US2, Universal Dimming Transceiver.
Simply Automated, Incorporated
6108 Avenida Encinas, Suite B, Carlsbad, CA 92011 USA
Technical Support:
www.simply-automated.com
or
800-630-9234
452-0008-1001 Rev. B Revised: May 27, 2008
