805-640-6700
•
© SimpliPhi Power, Inc. REV072319
LITTLE GENNY OPERAT
OR’S MANUAL | 6
Product Details: The Little
Genny’s Power Inverter
•
AC Power Switch
: This switch controls AC output of the inverter.
•
US Sockets
: These two outlets can supply up to 2.6 Amps combined at 115V AC / 60 Hz.
•
USB Charging Ports
: These power ports can supply 5 Volts DC at 2.4 Amps for charging or
powering tablets, e-readers, smart phones and other small electronic devices. The USB outlets
on the inverter are always on. The LED light on the Little Genny’s inverter indicates how full the
battery is. A green LED light represents a State of Charge of 50% or greater. A yellow LED light
means that the battery’s voltage is low, red is very low, and flashing red will appear just before
the unit turns off.
•
LED Power Indicator
:
o
Green light
indicates the inverter is working normally.
o
Red light
indicates the inverter shut down due to overheating, overload, over voltage,
low voltage, or another fault condition.
▪
Immediately turn off all connected AC appliances if the red FAULT LED is lit.
Allow the inverter to cool before resuming normal operation. Make sure that the
ventilation vents are not blocked.
•
Cooling Fan
: The cooling fan runs in the case of normal inverter operation.
