man-en-smx-rns02.docx
© 2020 SIMPLINX
- 23 -
9.2.
WAN Settings Page
There are two options for WAN connection;
With DHCP, the device receives all configuration(Including IP address) (Recommended)
If you turn off DHCP, you can provide IP, Network Mask, Gateway and DNS configurations
manually.
If you change these settings, you must restart the device for the new settings to take effect.
9.3.
Wireless Settings Page
You can access Wireless Client and Wireless Hotspot settings from this page.
Bu using the Wireless Client setting, you can connect your device to a wireless network and take your
device online. There are two options;
You must select the wireless and DHCP options as active and enter the SSID, SSID Password
information for the network you want to connect to.
If you turn off DHCP, you can provide network configuration manually by entering the IP,
Network Mask, Gateway and DNS in addition to SSID and SSID Password information.
For wireless Hotspot connection;
With the Wireless Hotspot setting, you can enable your device to broadcast Wi-Fi. By checking
the “Hotspot Active” option and entering your Hotspot Password you want to set, you can
enable your device to broadcast Wi-Fi with its serial number.
If you change these settings, you must restart the device for the new settings to take effect.
The Hotspot SSID is the same as your device's serial number.