Step 2
D
6
6
6
1. Insert two Dowels 6 into guide holes on Back Support Bar D .
2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
Step 3
1. Align guide holes on Right Side CR with Dowel on Back Support Bar D .
2. Insert Cross Nuts 1 into guide holes in Back Support Bar D with the slot
facing out. Use a flathead Screwdriver to turn it to align with the Bolt 1 .
3. Use Allen Key 2 to tighten Bolts.
A
CR
D
1
1
2
Front /
Avant
Model # AXCRYL-14
Assembly
10
