background image

16/17

1.

 

Attach one of the mounting brackets securely to the back edge of

          

the furniture. Use the shorter screw.

2.

 

Determine where furniture is to be placed and mark location on

          

the wall for mounting bracket screw hole approximately 2 inches

          

below

 the bracket mounted to the furniture.

3.

 

Drill a 3/1

6

 inch hole in the wall. Press the plastic anchor into the

          

hole and gently tap until the flange on the anchor is against the

          

wall surface.

4.

 

Position the bracket over the anchor and use the longer screw to

          

securely attach the bracket to the wall.

5.

 

Place the furniture so the back edge is in line with the bracket on

          

the wall.

6.

 

Lace an end of the nylon 

zip-tie strap

 down through each bracket.

          

Bring both ends together and slide the 

smooth side upright

          

through the 

square-shaped end and pull through to create the 

          “locked” position.

7

.

 

Check to make sure the strap is securely laced and locked to the

          

brackets.

 

DO NOT

 put a TV or other heavy objects on top of a Storage

          Cabinet or any other furniture not intended for use with a TV 

 

DO NOT

 place heavy objects in top drawers 

 

DO NOT

 let children climb or hang on drawers, doors or shelves

Furniture Tip Over Restraint Instructions:

x

x

FURNITURE TIP OVER RESTRAINT ASSEMBLY

Summary of Contents for WyndenHall brooklyn + max AXCRCOS15-MAH


















Reviews: