Step 7
1. Attach Magnet Plates 6 to bottom corner of Doors E using Phillips
Screws 4 into pre-drilled holes on Doors E .
2. Attach Magnets 6 using Phillips Screws 4 into pre-drilled holes on Divider D .
3. Use Phillips screwdriver to snugly tighten screw.
4. Use Phillips screwdriver to attach Handle 7 to Doors E .
NOTE:
The screwdriver is not
included in the hardware pack.
D
7
6
4
4
6
A
L
A
R
Front Side
E
E
15
Model # AXCRAMH14-HIC
Assembly
