SIMPLIHOME WyndenHall brooklyn + max 3AXCCON-03 Quick Start Manual Download Page 4

4/15

CARE and MAINTENANCE

Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative 
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, 
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally 
along different grain directions. As humidity changes, the components of wooden objects are 
continually pushing and pulling against each other. This pressure often results in parts of furniture 
no longer fitting together closely or becoming distorted or breaking from their own internal 
stresses. 

The response to relative humidity changes begins with determining the annual average RH for 
your particular space. Then try to keep the RH in the space where your furniture is as close to that 
average as possible, generally within about 10% up or down. De-humidify in the summer and 
humidify in the winter. 

Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating 
systems, which can drive down interior RH in the winter, almost invariably cause problems for 
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing 
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A 
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor 
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it 
to crack or split.

Remember, that not all woods are created equal. Two factors that help determine how rapidly a 
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard 
wood will dry less rapidly than pieces made from softer woods.

Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece 
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other 
finishes.

To help protect your wood furniture, take these steps:

• 

Use a humidifier, preferably one with an automatic control system that can sense the humidity

   level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
   expand and contract.

• 

Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.

• 

If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4 

    inches away from the wall, giving the heat and air space to circulate.

• 

Dust with soft dry cloth.

• 

Do not use liquid or aerosol products.

• 

To avoid marking, do not place rubber on surface (foot pads, etc.) 

• 

For soil build-up, wipe with damp cloth & dry. 

• 

Do not use abrasive cleaners. 

IMPORTANT

 : 

Please read this manual carefully before beginning

assembly of this product

Keep

 

this manual for future reference. 

Summary of Contents for WyndenHall brooklyn + max 3AXCCON-03
















Reviews: