SimpliFire SF-PP23-E Owner'S Manual Download Page 5

5

SimpliFire  •  SF-PP23-E, SF-PP26-E  •  2040-901  Rev. D  •  10/13

  

Note:

  The device complies with Part 15 of the FCC Rules.  

Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and

2.  This device must  accept any interference received, 
    including interference that may cause undesired 
      operation.

MODELS:  SF-PP23-E, SF-PP26-E

LABORATORY:  CSA International

TYPE:  Electric Air-Heaters Fixed and Location-Dedicated 
             Electric Room Heaters

STANDARD: UL 2021 (2

nd

 Edition) CSA C22.2 No 46-M1988

A. Appliance Certifi cation

NOT INTENDED FOR USE AS A PRIMARY HEAT SOURCE.  

This appliance is tested and approved as either supplemen-
tal room heat or as a decorative appliance.  It should not be 
factored as primary heat in residential heating calculations.

NOTICE: This installation must conform with local codes. 

GENERAL INFORMATION 

 

 

B.  Unpacking and Inspecting Appliance 

WARNING! DO NOT use this Electric Fireplace if any 
part has been under water.  
Immediately call a qualifi ed 
service technician to inspect and to replace any part of 
the electrical system if necessary.  Keep plastic wrapping 
away from children.

•  Carefully remove the appliance and components from 

the packaging.  Discard packaging.

•  Carefully inspect components for any damage.

•  Reference parts list to verify all parts have been received.

•  Read all the instructions before starting the installation.  

Follow these instructions carefully during the installation 
to ensure maximum safety and benefi t.

This equipment uses and can radiate radio frequency 
energy and, if not installed and used in accordance with 
the instructions , may cause harmful interference to 
radio or television reception, which can be determined 
by turning the equipment off and on.  The user is encour-
aged to try to correct the interference by one or more of 
the following measures:

•  Reorient or relocate the receiving antenna

•  Increase the separation between the equipment and the 

receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult an experienced radio/TV technician for help. 

C.  Model and Serial Number Information 

 

The model and serial number information is located on 
the rating plate.  The rating plate is located on the rear  
exterior wall of the fi replace. 

SF-PP23-E

SF-PP26-E

Model Name: ___________________________________________ Date purchased/installed: __________________

Serial Number: __________________________________________ Location on fi replace: _____________________

Dealership purchased from:  _______________________________ Dealer Phone:  __________________________

Notes: _______________________________________________________________________________________

_____________________________________________________________________________________________

We recommend that you record the following pertinent 
information about your fi replace.

Homeowner Reference Information

Summary of Contents for SF-PP23-E













Reviews: