Simplified MFG RPS1 User Manual Download Page 14

  14  /  15

 

 

Warranty 

 

Should you feel your product does not function adequately due to defects in materials or 

workmanship, we (referred to as “the warrantor”) will, for the length of the period indicated 

below (starting from the original date of purchase) either: a) Repair the product with new or 

refurbished parts. or b) Replace it with a new or refurbished product. 

All Simplified MFG products are covered by a 3 year PARTS and LABOR warranty. During this 

period there will be no charge for unit repair, replacement of unit components or 

replacement of product if necessary. The decision to repair or replace will be made by the 

warrantor. The purchaser must mail-in the product during the warranty period. This limited 

warranty only covers the product purchased as new and is extended to the original 

purchaser only. It is non-transferable to subsequent owners, even during the warranty 

period. A purchase receipt or other proof of original purchase date is required for the limited 

warranty service. 

1.

 

This Limited Warranty ONLY COVERS failures due to defects in materials or 

workmanship and DOES NOT COVER normal wear and tear or cosmetic damage. The 

limited warranty also DOES NOT COVER damage that occurs in shipment or failures 

caused by products not supplied by the warrantor, failures resulting from accident, 

misuse, abuse, neglect, mishandling, misapplication, alteration, incorrect 

installation, set-up adjustment, implementation of/to consumer controls, improper 

maintenance, power line surge, lightening damage, modification, service by anyone 

other than a manufacturer-approved service center or factory authorized personnel, 

or damage attributable to acts of God. 

2.

 

There are no express warranties except as listed under “limited warranty coverage.” 

The warrantor is not liable for incidental or consequential damage resulting from the 

use of this product or arising out of any breach of this warranty. For example: 

damages for lost time, the cost of having a person/persons remove or re-install 

previously installed equipment, travel to and from service location, loss of or 

damage to media, images, data or other recorded/stored content. The items listed 

here are not exclusive, but are for illustration only. Parts and service not covered by 

this limited warranty are not the responsibility of the warrantor and should be 

considered the responsibility of the individual. 

 

 

 

 

Summary of Contents for RPS1


















Reviews: