A
D
B
F
C
E
DIAGRAM 2: TOP & BOTTOM RAIL
%%"
%%"%%"
%%"
A) STANDARD UPRIGHT: The
$(
base
fl ange is for mounting to level surfaces. The
%%"
connects the railing to the
%%"
fi tting.
B) RAMP UPRIGHT:
The
$
base fl ange is for
angled surfaces. The upright angle is fi xed by tightening
the set screws. The railings are attached in the same
manner as the Standard Upright. The bottom rails are
connected with
$(
on mids and
$(
on ends.
C) WALL MOUNT: The
%%"
is connected to the
wall or wood posts using 6mm screws or bolts.
The
%%"
is attached to the railing with No. 12
self-drilling screws.
D) POST RETURN D-RETURN:
The
D-return connects to the post using the
%%"
and
%%"
. The
%%"
receives the small
end of the
%%"
. The
%%"
is then joined to
the
%%"
using a
%%"
.
E) ADJUSTABLE ANGLES:
In order to
accomplish angles with a smooth surface, use
the
%%"
and two
%%"
. These are frequently
used at the top and bottom of ramps and
stairs.
F) WALL RETURN: The
%%"
wall return fl ange is
connected to the wall or wooden posts with 6mm
screws or bolts. It is then connected to the pipe
with a
%%"
.
%%"
%%"
%%"
%%"
%%"
%%"
%%"
%%"%%"
%%"
$(
$
%%"%%"
%%"
$(
For assistance visit: www.simplifi ed
CVJMEJOH
.co.uk/solutions/dda-handrail/ or call 0844 335 8460
5
