OPERATING INSTRUCTIONS
TEMPERATURE SELECTION
The refrigerator control panel is located on the top
of the refrigerator compartment. This panel controls
the temperature of both the refrigerator and freezer
compartment. The panel in the freezer compartment
is used to balance the cold air distribution between
the two compartments.
Press the set button on the control panel in
refrigerator compartment to choose the desired
setting. The lower numbers indicate colder
temperature settings. The higher numbers indicate
warmer temperature settings.
Slide the temperature control in the freezer
compartment to allow more or less cold air into the
freezer compartment.
Internal temperature of the appliance can vary
based on ambient temperature, the quantity of items
stored and how frequently the door is opened.
FAST COOLING
The appliance can be set to the fast cooling mode to
reach the lowest temperature in the shortest amount
of time. Fast cooling mode will run the compressor
continuously for a maximum of 3 hours until the
appliance reaches the coldest possible temperature.
After 3 hours fast cooling mode will turn off and the
appliance will resume normal functioning.
4
DOOR OPEN ALARM
If the door of the appliance is left open for more
than 3 minutes, an alarm will sound.
Press the set button on the control panel to silence
the alarm for 3 minutes.
The alarm will stop sounding once the door is
closed.
APPLIANCE FAILURE ALARM
On the control panel, if the number 2 and the
number 6 are fl ashing at the same time, this
indicates a failure in the appliance. Contact Danby
consumer care for more information.
LEVELING INSTRUCTIONS
There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as
it will go, until the top of the foot is touching the
bottom of the cabinet.
2. Slowly turn the leveling leg clockwise until the
appliance is level.
