5
Operator Safety
20
3.5
Slope Operation
Operation on slopes can be dangerous. Using the unit on a
slope that is too steep where you do not have adequate wheel
traction (and control) can cause sliding, loss of steering, control,
and possible rollover. You should not operate on a slope greater
than a 3.5 foot rise over a 20 foot length (10 degrees).
Always mow up and down slopes, not across, and avoid sudden
turns or rapid speed changes. Reduce speed and use extreme
caution on ALL slopes.
Also, note that the surface condition you are on can greatly
impact your ability to safely operate this machine. Operating on
wet or slippery slopes can cause sliding and loss of steering and
control. Do not operate on slopes that are slippery, wet, or have
soft soil conditions.
If you feel unsure about operating the unit on a slope, don’t do it.
It’s not worth the risk.
Thrown Objects
This unit has spinning mower blades. These blades can pick up and throw
debris that could seriously injure a bystander. Be sure to clean up the area to
be mowed and remove objects that could be thrown by the blade BEFORE you
start mowing.
Do not operate this unit without the entire grass catcher or discharge guard
(deflector) in place.
Also, do not allow anyone in the area while the unit is running! If someone
does enter the area, shut the unit off immediately until they leave.
Moving Parts
This equipment has many moving parts that can injure you or
someone else. However, if you stay in the operator zone (stay
seated in the seat), and follow the safety rules in this operator’s
manual, the unit is safe to operate.
The mower deck has spinning mower blades that can amputate
hands and feet. Do not allow anyone near the unit while it is
running! Keep safety devices (guards, shields, and switches) in
place and working.
To help you, the operator, use this equipment safely, it is
equipped with an operator-present safety system. Do NOT
attempt to alter or bypass the system. See your dealer immedi-
ately if the system does not pass all the safety interlock system
tests found in this manual.
Not
for
Reproduction
